My compressor randomly shuts down reading high temp of 232f/233f on the display, When I hit reset it will read actual temp(temp checked and verified), starts, runs, starts to build pressure and then jumps temp to 232/233f and shuts down(normal load temp is about165f). After 2nd shutdown the display goes to --- and has to have the main panel breaker reset before restart. Then do it all again. We have installed a new thermo probe, heater packs, and all filters, oil is full and all lines have been checked for blockage. Ambient room temp varies 60f to 100f and is located with plenty of room to breathe on the shop floor with compressor exhaust being fan boosted outside the building. 3phase electrical feed is verified. We no longer have the manuals due to theft by a machine shop tech(who passed away) that we hired to fix this. We are on hold on the shop floor and production is halted until this is repaired. Any help is appreciated, I have googly eyes and phone ear from websites and "techs" that offer no help except to replace with their product. We can't afford to replace.